Installed at a positive angle, these belt scrapers should be mounted directly against the head pulley below the normal trajectory path of the material. If a secondary scraper cannot be installed, we recommend that a second primary scraper be installed.
Installed at a positive angle, these belt scrapers should be mounted directly against the head pulley below the normal trajectory path of the material. If a secondary scraper cannot be installed, we recommend that a second primary scraper be installed.
The beauty of the Tru-Trac ® Flat Return Tracker is its simplicity. The tracker is essentially made up of two parts: An inner, stationary drum, attached to a pin that allows it to pivot laterally, on exactly the same plane as the belt and an outer drum that rotates around the inner assembly. The outer drum is tapered towards either end, c towards either end, creating a slightly smaller diameter on the outside edges than in the middle.
Tru-trac Impact Beds are designed to provide protection for your conveyor belt from impact damage from large rocks which can put a stop to operations. Our modular style impact beds provide impact protection for the conveyor belt , as well as helping to control spillage in the conveyor loading zone. Impact beds are the solution for many conveyor bulk material handling industries.
Stay in the loop and be the first to know about our exclusives and upcoming releases.
